3003 Aluminum Checker Plate

3003 Aluminum is alloyed with 1.20% manganese, which increases the strength of 3003 over commercially pure aluminum (1100 series). 3003 has excellent workability, weldability, and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for an aluminum with good weldability. H14 designates the temper, and means that 3003 has been strain hardened and partially annealed. In this condition, 3003 can be easily formed. Embossing or debossing 3003 in this temper should not strain or crack the aluminum. 3003  Aluminum tread checkered plate sheet- Often referred to as diamond plate, it has the same properties of 3003-H14, while excellent at resisting corrosion, and strong for light weight aluminum applications. The diamond trend pattern is slip-resistant and cosmetically appealing.

The versatile application possibilities of 3003 Aluminum tread checkered plate sheet make it an ideal material which is suitable for both indoor and outdoor use thanks to its excellent characteristics. Other names for used aluminium checker plate are diamond plate, tread plate or Durbar floor plate, checkered plate.Depending on the type of plate, 1 to 5 bars are arranged next to each other, forming a checked pattern. It is differentiated between 1 bar(diamond), 2 bar, 3-bar and 5-bar patterns.

1 bar

1 bar

2 bar

2 bar

5 bar

5 bar

1.Indestructible and resilient despite low weight

3003 Aluminum tread checkered plates sheets are very resilient against aggressive substances and therefore, they regarded as indestructible. Due to their durability, they are used in many different areas because they do not lose their shape or look, even after a long time. Whether industrial floors, airplanes, ships and vehicles, or stairs indoors or outdoors - aluminium checker plates are a popular material which is appreciated for its excellent properties, the high resilience and the low weight. Even designers use these plates due to their decorative look.

2.Attractive pattern ensures slip resistance

During production, the pattern is applied to the plate by forming rolls which are pressed onto the plate with a large force. In doing so, the bottom of the plate remains plain. It is not possible to emboss the aluminium plate subsequently.Due to the diagonally finned structure, the plate becomes slip-resistant which is why it is also suitable for use outdoors and in wet areas. In addition to the finned structure, there are many other shapes and patterns which provide the same characteristics

Alloy

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Ga

V

Each

Total

Alu

3003

0.6

0.7

0.05

0.05-0.2

1.0-1.5

-

-

0.10

-

-

-

0.05

0.15

Remainder

Alloy

1060, 1100, 1200, 3003, 3105, 5005, 5052, 5251, 5754, 5454, 5154, 5083, 5086  6061, 6082

Temper

H114, H224, H12, H14, H16, H18, H32, H34, H36, H38, T4, T6, F

Surface

Bright finish, Mill finish

Bar Difference

1 bar (Diamond), 2 bar, 3 bar, 5 bar

Available Dimension

Mill finish Surface

Bright finish Surface

Thickness  (mm)

1.00---6.50mm

1.20---6.50mm

Pattern height

Sheet Thickness from 1.0mm to 2.0mm,  bar height: 0.50mm

Sheet Thickness from 1.0mm to 2.0mm,  bar height: 0.50mm

Sheet Thickness from 1.0mm to 2.0mm,  bar height: 1.00mm

Sheet Thickness from 1.0mm to 2.0mm,  bar height: 1.00mm

Sheet Thickness above 2.0mm,  bar height: 1.50mm

Sheet Thickness above 2.0mm,  bar height: 1.50mm

Width (mm)

Maximum 1500mm

Maximum 1650mm

Length (mm)

Maximum 6000mm

Maximum 6000mm

Paper interleaves

On request for selected

On request for selected

Normal size

1200×2400mm, 1219×2438mm,  1219×3048mm

1200×2400mm, 1219×2438mm,  1219×3048mm

Application

1.3003Aluminum tread checkered plate sheethas good skid resistance. So it is usually used in the loading ramps, trench covers, dock flooring, stair treads and even for the car, truck, ambulance and fire truck.

2.It has the decorative function, so it can be used as decoration wall panels, cabinet and ceilings.

3.Because of the anti- corrosion, it can be used in the chemical industry, or in the decoration of the ship and port facilities.

product quality

Compliance with international standards

EN 573-3 Aluminium and aluminium alloys - Chemical composition and form of wrought products – Part 3: Chemical composition and form of products

EN 1386 Aluminium and aluminium alloys - Tread plate - Specifications

EN 15088 Aluminium and aluminium alloys - Structural products for construction work - Technical conditions for inspection and delivery

Get In Touch,Let's talk

Hello! If you are interested in our products and leave your demand, we will give you an accounting quotation in time.
Or you can send your request to our email address: info@chalcoaluminum.com

Send Your Request
  • 0086-371- 55689814 55686476
  • info@chalcoaluminum.com
  • 126#4 Building A,No.89 Science Avenue,National HI-Tech Industry Development Zone,Zhengzhou,Henan
Social touch

contact us
Get a quote Leave Message
Hi,may I help you with products, price, etc?